Customer Project Gallery

Share your creativity. Be inspired.

How to upload your own photos

1in Jam chuck for Mini Salt and Peppermill

Added June 20, 2019 by Owen

1 inch jam chuck

"After boring 1”hole I inserted chuck in hole and it expanded it by turning nut counter clock wise.I inserted it into universal tail stock and it rotated accurately with no vibration at all turning speeds"

Shop This Project

1in Jam chuck for Mini Salt and Peppermill

Added June 20, 2019 by Owen

1" Jam Chuck

"Good product. Runs true and is easy to insert in to !" bore."

Shop This Project

Antique Style Copper Finish Peppermill Mechanism

Added June 20, 2019 by Owen

Antique Style Copper Finish Peppermill Mechanism

"Lot of fun to work with.A little difficult to get the hole drilled accurately for the screw bosses."

Shop This Project

4 Bottle Opener Keychain Kit Starter Set

Added June 20, 2019 by Tom P

Great Idea

"I have made a few of these and have received all kinds of compliments. They are easy to make and I use scrap material that would have just been laying around. They are a little pricey but that is the only fault I could find."

Shop This Project

Pewter Bowl Lids

Added June 18, 2019 by Jeanette

Jeanette

"Make a great gift or to sale"

Shop This Project

Brushed Satin Letter Opener Kit

Added June 18, 2019 by Michael

Great kit

"Easy to assemble"

Shop This Project

Antique Style Brass Finish Peppermill Mechanism

Added June 16, 2019 by Mike

Fun build!

"Fun and easy build loved turning it!"

Shop This Project

T Handle Corkscrew Kit (with stopper)

Added June 11, 2019 by Christopher

Quality.

"Easy project that makes a great gift. Easy to turn and assemble. Sturdy and precise."

Shop This Project

10 Bottle Stopper Starter Set in Chrome- w/ 1 in. x 8tpi chuck

Added June 11, 2019 by Marcia S

Great Kit But

"Nice kit that's easy to use but you need to label the wood. Hard to sell unknown wood products."

Shop This Project

Majestic Black T/N and Rhodium Letter Opener

Added June 6, 2019 by Stanley S

Love This Kit

"Very nice kit. Easy to build, really beautiful letter opener. Simple tip, thread the blade into the coupler before you press it into the blank so you can align the coupler to the position you want the blade to align with. In other words, if there’s a particular side of your blank that you want the flat part of the blade to align with, first screw the blade all the way in and orient the coupler accordingly. Make a small mark on the coupler, maybe a piece of tape or a pencil mark. Then unscrew the blade and press according to your mark."

Shop This Project

Brushed Satin Key Chain Kit

Added June 2, 2019 by Shane

Great gift idea

"Easy & quick project"

Shop This Project

Chrome Eggoscope Kit

Added May 26, 2019 by Christine

Great attention grabbers

"These are neat gifts & conversation starters. Good at fairs & gift shops. Instructions are straightforward. Now I use a pencil eraser to hold the wire & a tiny skinny obsolete stylus (for writing/drawing) to follow the shape of the wire & push it down. I'd love to keep dust out ... maybe next year."

Shop This Project

Chrome Eggoscope Kit

Added May 26, 2019 by Christine

Great attention grabbers

"These are neat gifts & conversation starters. Good at fairs & gift shops. Instructions are straightforward. Now I use a pencil eraser to hold the wire & a tiny skinny obsolete stylus (for writing/drawing) to follow the shape of the wire & push it down. I'd love to keep dust out ... maybe next year."

Shop This Project

Classic Bottle Stopper Kit in Chrome

Added May 23, 2019 by Doug

Inexpensive gifts

"Inexpensive, fun to turn and make a nice looking gift."

Shop This Project

Monarch Brush Kit

Added May 15, 2019 by Lance L

Great set

"Bought as part of the #PKRAMSET2 starter set (no longer available). Only issue was the brush knot resin was a bit thicker than it needed to be. But, it easily cut down with my bench top bandsaw. End result was beautiful."

Shop This Project

Detachable Key Ring 24kt Gold Keychain Kit

Added May 15, 2019 by Richard

photo of the ball design

"I mentioned in my review that I used a ball design. Here is a photo of some of the key chains using that design."

Shop This Project

1-7/16 in. Mini Clock - Black Face, Gold Indicators

Added May 14, 2019 by sean s

Great looking desk clock

"I combined this clock face with a bloodwood base to make a great looking gift. The instructions were easy to follow and the clock fit perfectly. https://www.etsy.com/listing/669246605/wooden-desk-clocks?ref=shop_home_active_1"

Shop This Project

1-7/16 in. Mini Clock - Black Face, Gold Indicators

Added May 14, 2019 by sean s

Great looking desk clock

"I combined this clock face with a bloodwood base to make a great looking gift. The instructions were easy to follow and the clock fit perfectly. https://www.etsy.com/listing/669246605/wooden-desk-clocks?ref=shop_home_active_1"

Shop This Project

Measuring Cup Kit - Set of 4

Added May 13, 2019 by Shane C

Easy to use

"Great gift idea and easy to use kit. Will buy again."

Shop This Project

Measuring Spoon Kits: Set of 4

Added May 13, 2019 by Shane C

Great gifts

"Easy to make and make really good gifts."

Shop This Project

2-in-1 Seam Ripper and Stiletto in Chrome

Added May 7, 2019 by Nicholas H

"The kit is impressive overall. Assembly presents a slight challenge, especially if it is your first seam ripper style kit. When pushing the metal pieces in try to utilize a metal rod with the same diameter as the removable stiletto and seam ripper. Wrap it around that and try to hold the entire thing as you slide it in as to prevent it from bending at all or crimping. They make wonderful gifts for anyone who likes to work on small projects, sew, quilts, or just about anything so they are fairly versatile. They come in handy for anyone that likes to do embroidery as well. Depending on the wood or acrylic/hybrid and the finish I would price this around no less than 20 or up to $30 for hybrids and exotics or "special" type woods like the COA Bethlehem Olive Woods."

Shop This Project

2-in-1 Seam Ripper and Stiletto in Chrome

Added May 7, 2019 by Nicholas H

"The kit is impressive overall. Assembly presents a slight challenge, especially if it is your first seam ripper style kit. When pushing the metal pieces in try to utilize a metal rod with the same diameter as the removable stiletto and seam ripper. Wrap it around that and try to hold the entire thing as you slide it in as to prevent it from bending at all or crimping. They make wonderful gifts for anyone who likes to work on small projects, sew, quilts, or just about anything so they are fairly versatile. They come in handy for anyone that likes to do embroidery as well. Depending on the wood or acrylic/hybrid and the finish I would price this around no less than 20 or up to $30 for hybrids and exotics or "special" type woods like the COA Bethlehem Olive Woods."

Shop This Project

Measuring Spoon Kits: Set of 4

Added May 3, 2019 by Ron B

Nice Set. I liked it so much I ordered 2

"I bought one because my wife was looking in the catalog. She saw them and wanted a set. Then when her dad got married I had to find a gift to give them so I bought another one of them"

Shop This Project

Measuring Spoon Kits: Set of 4

Added May 3, 2019 by Ron B

Nice Set. I liked it so much I ordered 2

"I bought one because my wife was looking in the catalog. She saw them and wanted a set. Then when her dad got married I had to find a gift to give them so I bought another one of them"

Shop This Project

Loading More...
Next
97% Recommend
PennStateInd.com
X