Home > Woodturning > Pen Turning Supplies > Mandrels > Morse Taper Maxi-Mandrel: 2 Open 7/8" wrenches to close collet on Maxi Mandrel

Roll Over Image to Magnify

Morse Taper Maxi-Mandrel: 2 Open 7/8" wrenches to close collet on Maxi Mandrel

Item #: PKMWR
Availability: In Stock Ready to Ship See Shipping Details
Quantity: Add to Wishlist
Now Accepting Paypal


Description Specifications Customer Reviews

2 Open 7/8" wrenches to close collet on Maxi Mandrel
2 Open 7/8" wrenches to close collet on Maxi Mandrel styles #PKM-ELC and #PKM-FLC

Morse Taper Maxi-Mandrel: 2 Open 7/8" wrenches to close collet on Maxi Mandrel Specifications

Specification Description
Category: Mandrels

Morse Taper Maxi-Mandrel: 2 Open 7/8" wrenches to close collet on Maxi Mandrel Customer Reviews

Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 13 Reviews

Write an online review and share your thoughts with others.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Does what it is supposed to
Reviewer: Chris Bonessi (Meadville, PA)
Submitted: 3.16.2010

Not a necessary product, but very convenient. I just keep these right with my mandrel, so they are always right there. There are also nice because they are so small, you don't have to worry about over tightening the mandrel. One gripe, the paint on the inside of the wrench makes the span too small, but a little work with a file takes care of it easily.

5 out of 55 out of 55 out of 55 out of 55 out of 5 7/8 wrenches
Reviewer: Jerald Fite (Springfield, IL)
Submitted: 3.5.2010

Inexpensive. Does the job that it's designed to do. Stick them to your lathe with a super magnet and they are always at hand without a search

5 out of 55 out of 55 out of 55 out of 55 out of 5 Convenience
Reviewer: Jonathan Murphy (Englishtown, NJ)
Submitted: 12.13.2009

These wrenches are totally unnecessary, but I'm glad I bought them. I can use two pair of pliers, or two wrenches from my wrench supply to do the same thing. But that means finding them. The light weight and thin "spanners" are in the same drawer where I keep all my mandrel related parts, as well as my partially prepared blanks, tubes, project parts, etc. I can go from turning a large bowl on a chuck to shifting to pens (when the wife needs a gift for someone) without looking for wrenches. The convenience is worth the few bucks - and the same applies to PSI, or other makers, chucks. Get the flat spanner wrenches that fit the device and keep them together with the device.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Not bad for a wrench!
Reviewer: Stephanie Pace (Belvidere, IL)
Submitted: 8.18.2009

I bought this set after struggling with adjustable wrenches, and after pricing Sears 7/8 " open end wrenches. ($16.95 for ONE???) I do a lot of different sized pen kits, and these are the best tool and the best value to adjust the Maxi-Mandrel to each pen kit. With a really small pen kit, using bushings to take up the space is doable, but I found the mandrel wobbles less if you choke up on the barrels. The only problem that a swift touch with a piece of sandpaper cured was the paint on the wrenches made them a bit tight on the mandrel. I just touched up the inside faces of the wrenches and that took care of it. No more struggles! I just wish I had bought these when I bought the darned mandrel.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Open End Wrenches
Reviewer: Chuck Taylor (Manchester, TN)
Submitted: 6.9.2009

The wrenches are great. I always have a quick and safe way to adjust the mandrel. Quality is outstanding.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Indespensible time/space savers!
Reviewer: Robert Bohn (Yulee, FL)
Submitted: 3.15.2009

These little guys are golden - easy to store close by the lathe without being obtrusive, real time savers. A must-have for Collet style mandrels. Good value for the money.

5 out of 55 out of 55 out of 55 out of 55 out of 5 lathe wrench
Reviewer: Corey Doner (Belleville, IL)
Submitted: 3.12.2009

Does the job as intended! Good quality craftsmanship!

5 out of 55 out of 55 out of 55 out of 55 out of 5 decent wrenches
Reviewer: jeff stitzel (warren, MI)
Submitted: 3.12.2009

perfect for the price

5 out of 55 out of 55 out of 55 out of 55 out of 5 Mandrel Wrenches
Reviewer: Jan Hicks (Ringgold, GA)
Submitted: 3.12.2009

Great tools that make changing the mandrel a breeze.

4 out of 54 out of 54 out of 54 out of 54 out of 5 Mandrel Wrenches
Reviewer: Kent Eubank (West Des Moines, IA)
Submitted: 3.11.2009

I should of bought these a long time ago. The ease of just grabbing the right size wrenches to adjust the mandrel is worth every penny. The price is hard to beat.

View all 13 reviews

WE ACCEPT

VISA, MasterCard, American Express, Discover, and PayPal

Online prices and selection generally match our online catalog, but may vary.
Prices and offers are subject to change.
© Penn State Industries
All Rights Reserved.