Home > Woodturning > Lathe Accessories > Headstock Drive Centers > Super Drive Center: #2 MT - 5/8" CROWN

Super Drive Center: #2 MT - 5/8" CROWN

Item #: LCENTSS21
$19.95
Quantity:
In Stock Ready to Ship

Rating 5 out of 55 out of 55 out of 55 out of 55 out of 5

Description Specifications Shipping Reviews and Awards
The PSI Super Center #2 MT 1/2" Crown
Get a better bite on your spindle with PSI’s new “Super Center”. More teeth give a better bite while providing equal pressure and a positive drive. There is no need to hammer your drive center into the work piece and risk splitting your work. A spring loaded point simplifies the positioning of your spindle in the center and retracts to avoid spitting your work when tailstock pressure is applied. Compatible with headstocks with #2MT spindles. Crown is 1/2" wide for narrower work.
Compatible Spindle Sizes: #1 MT
Category: Headstock Drive Centers
  • Package Weight: 0.38 pounds
  • Subject to Minimum $7.50 shipping charge
  • Packing: This item may pack with other items.

Note: Above shipping policies apply to Continental US only. We will call or email to advise you of shipping policies to other locations.

Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 9 Reviews

Write an online review and share your thoughts with others.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Drive Center
Reviewer: Eddie Slone (Winchester, KY)
Submitted: 10.22.2009

This center is very well made and finished perfectly. The fit to my lathe spindle was great. I have used another drive spindle that worked but takes mush longer to fit up than this one. I have used it on approximatelu 15 spokes and I'll have to say that it is a great tool. This drive center holds better than the one i was using that i had to hammer into the end of the spoke. No splitting with this one and holds tight with less pressure from the tail stock. Great addition to my tools. Eddie Slone

5 out of 55 out of 55 out of 55 out of 55 out of 5 lathe drive center
Reviewer: Joel Stinchfield (Paso Robles, CA)
Submitted: 9.18.2009

Originally ordered the wrong size, sent back, reordered the correct size. Customer service was great.

5 out of 55 out of 55 out of 55 out of 55 out of 5 great drive center
Reviewer: Larry Patterson (Jackson, MS)
Submitted: 8.11.2009

i have had problems when trying to "seat" my old drive center. It would tend to split the piece. This drive center really grabs the work piece without splitting it!

4 out of 54 out of 54 out of 54 out of 54 out of 5 Not a Sorby duplicate
Reviewer: Galen Vetterick (Ames, IA)
Submitted: 4.21.2009

For the price you cannot expect to be like a Sorby. The spring loaded point is a little stiffer than I expected. The teeth angle is such it still can slip in hard maple. Still better than a four prong.

4 out of 54 out of 54 out of 54 out of 54 out of 5 Quality drive center
Reviewer: Robert Steffan (Wrightstown, PA)
Submitted: 3.13.2009

This is a nice drive center for small projects. I use it for turning 2" X 2" blanks. I have had some slipage problems during roughing as the teeth are pretty small. I use mostly poplar and cedar for making fishing lures. Overall, I am pretty satisfied and use it all the time. A little longer teeth would make it a 5.

View all 9 reviews

LEARNING CENTER

Online prices and selection generally match our online catalog, but may vary.
Prices and offers are subject to change.
© Penn State Industries
All Rights Reserved.