Everything Except the Lathe Pen Turning Starter Set

Everything Except the Lathe Pen Turning Starter Set If you already have a lathe, turning tools, and sandpaper, this set is for you. 

Pen turning has probably crossed your mind. This set exists so the next step is turning, not shopping. Everything that is pen-specific, nothing you already own. No hunting down individual pieces, no second order when you realize something is missing. 

Skip the hardest part. 

For first timers, drilling the blank and gluing in the brass tube is where things go wrong. The blanks in this set come pre-drilled and pre-tubed with 7mm Slimline brass tubes already inserted. You go straight to turning. That is not cutting corners. That is the right way to find out what pen turning actually feels like before adding complexity. 

The tools that make it go right. 

The squaring jig squares your blank ends flush with the brass before you mount them. The deburring tool cleans the tube edges so assembly goes smoothly. The mandrel set holds your blanks on the lathe with the correct bushings so your finished components line up perfectly. The lathe-mounted pen press gives you alignment and control you cannot get pressing by hand. These are not throwaways. They are the same tools serious pen turners use every day. 

A finish that looks like you knew what you were doing. Friction polish goes on with the lathe spinning and cures from the heat. Two or three passes and raw wood becomes something with real depth and shine. Fast, forgiving, and the results are immediate. 

Five kits means your second pen is already better than your first. 

One kit lets you try it. Five kits lets you actually learn it. By the third pen most turners have the process down and are already thinking about what blank they want to turn next. 

What is in the box: