| Specification | Description |
| Category: |
Adhesives |
Average Customer Review: 



14 Reviews
Write an online review and share your thoughts with others.




Could be betterMid cure glue works well in +65 degrees, however when the shop temp drops the glue has an inconsistent hold action. CA glue works much better.




15m to useIt works, but not in 15m. You better give few hours or even overnight. 15m thats the time you have to apply it before it gets too sticky to use. Color/grip and everything else is very good.




EasyThis is a very easy epoxy to use. I have experimented with dyes with it and when dye is mixed with either component and then all mixed together it becomes a really pretty way of "glueing" stuff together. I use this when laminating different woods together for projects.




15 MINUTE MID-CURE EPOXYThis epoxy works great and goes a long ways. I have used it for years and find it superb for gluing pen kits and many other things. It is super strong.




Glue Troubles.I am very satisfied with all of the items on my order except the PSI Mid-cure Epoxy. I have had several pen blanks that did not glue solidly. The blanks split early in the turning process. In consultation with another wood-worker, he recommended Loctite epoxy glue. I have not had any difficulty with the pens that I have turned with the Loctite product. Thank you for sending these products in an expeditious way. I appreciate it.




prettypretty




Mid Cure EpoxyEasy to work with, very forgiving if the ratio of components is off.




Very StrongI like the Epoxy Glue on Iron woods and Antler. It has the ability to add the extra grip needed to adhere to hard surfaces. This is definitely a must in any turners collection of supplies.




Great for Pen/PencilsI've tried many adhesives, but since finding this Epoxy I don't use anything else for the insertion of pen tubes into blanks. I use PSI's Pen Tube Insertion Tool and mix only enough epoxy to allow a four to five minute gluing session. I've found that the epoxy begins setting up and difficult to use in a larger amount of time. So mix small batches, and split your gluing project in session. Using coarse sand paper to roughen the surface of the tube before apply the epoxy will result in a very secure hold. The epoxy will harden in less than one hour, but when possible I leave it to cure over night. "Great epoxy at a great price."




I'v Tried OthersI've tried other epoxies and they just don't measure up. These have a longer shelf life and, at least for me, seem stronger and more reliable. The price is about half of what other epoxies cost in my area, and they are delivered to my door.