Home > Woodturning > Pen Turning Supplies > Pen Assembly & Disassembly > Pen Disassembly Punch Set

Pen Disassembly Punch Set

Item #: PKDISET
$16.95
Reg. Price: $19.95
You Save: $3.00
Quantity:
In Stock Ready to Ship
Shipping Charge: $7.50 shipping for ground service

Rating 5 out of 55 out of 55 out of 55 out of 55 out of 5

Description Specifications Shipping Reviews and Awards
Salvage your pen parts, replace components, exchange components and help avoid buying new pen parts with this versatile kit. Disassembles nearly all pen and pencil kits with tubes and components of any size. Includes 28 rods from 3/32" to 17/32" in diameter including rods small enough to feed through twist mechanisms to pop off pen tips and rods large enough to remove components from very large pens. Complete instructions included. Helps solve the following problems:
• You assembled your pen and the wood cracked
• You pressed a component in too far or you want to remove the wooden tubes
• You inserted a part in the wrong direction, or and put them on a pen with a different plating
• You want to exchange tubes between pens
Category: Pen Assembly & Disassembly
  • Package Weight: 4.00 pounds
  • Shipping Charge: $7.50 shipping for ground service
  • Packing: Item is shipped in its own box.

Note: Above shipping policies apply to Continental US only. We will call or email to advise you of shipping policies to other locations.

Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 35 Reviews

Write an online review and share your thoughts with others.

5 out of 55 out of 55 out of 55 out of 55 out of 5 I Never write reviews, but
Reviewer: Rich Matselboba (Williamsburg, VA)
Submitted: 10.25.2009

I never write reviews for any products that I buy, but these simple rods really do the trick. I have salvaged many parts. Hardest part is hand-holding a pen while disassembling it (if you want to save the turning.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Disassembly Set
Reviewer: Gary Glatfelter (Puyallup, WA)
Submitted: 10.9.2009

A really great variety of punches. I like the stand to keep them organized making it easier to keep them together.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Saved Many Dollars
Reviewer: Michael Goetz (Cumming, GA)
Submitted: 10.6.2009

Within a few hours after receiving this punch set I took on the pile of old rejects that needed dis-assembly. The range of sizes provided a punch for every part I needed to remove. I successfully reclaimed enough kits to pay for the product the first time I used it. Mike G

5 out of 55 out of 55 out of 55 out of 55 out of 5 pen/pencil disassembly punch set
Reviewer: Milas Tipps (Cortez, CO)
Submitted: 9.22.2009

This set of punches has come in super handy for many operations involving pen assembly - disassembly. There is even a punch to clean out the brass tube if you get a little glue inside.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Nice kit for the money
Reviewer: Terrence Thompson (Pembroke Pines, FL)
Submitted: 9.20.2009

This collection of punches is probably more than you'll ever need, but it is a good value for the money. I have already discovered another use for the punch rods in an unrelated project, so I recommend the investment.

View all 35 reviews

ACCESSORIES AND RELATED PRODUCTS
10mm Disassembler Tool
Item #: PKDIS10
Our Price: $9.95
Rating: 5 out of 55 out of 55 out of 55 out of 55 out of 5
Quantity:
7mm Pencil Disassembler Tool
Item #: PKDISPCL
Our Price: $12.95
Rating: 4 out of 54 out of 54 out of 54 out of 54 out of 5
Quantity:
7mm Pen Disassembler Tool
Item #: PKDISPEN
Our Price: $12.95
Rating: 5 out of 55 out of 55 out of 55 out of 55 out of 5
Quantity:

LEARNING CENTER

Online prices and selection generally match our online catalog, but may vary.
Prices and offers are subject to change.
© Penn State Industries
All Rights Reserved.