3.5HP DCSUPER35 Dust Collector with 1 Micron Bags

It just plain works!

Setup: took minutes. Most of the system was assembled. The only hard part was lifting the 3.5hp motor, but it was worth it! Power: I had a 2hp unit from another company that I thought was strong but the DCSUPER35 is REAL powerful. I still put my hand over some open ports and just grin because it is so strong! Capability: I currently have 7 ports and everyone leaves the machine cleaned out. There is a little one in the table saw, but that has lots of gaps. The only thing that leaves a mess in the shop now is me! Overall Performance: Honestly how could I expect more. It just plain works. Anyone setting up a dust collection system should call and talk to Bill about the duct work. His help is invaluable.

Unbeatable quality for its Size

I have a rather small woodshop; my two-car garage doubles as a shop. So needless to say, floor space is very limited. There was enough space for me to build an attached closet, just behind the rear wall, roughly 4' x 8'. This closet houses my compressor and now DCSUPER35. Because of that limited space and the demand a 25" dual drum sander and other machinery requires a very specific dust collector. Upon much careful research, I found your product and thought it was too good to be true. I placed my order and, when it arrived, I was eager to set it up and turn it on. I found the directions to be clear and simple and all necessary parts to be present. In just a short time I had it up and running and was stunned by how much power it has for its size; just what the doctor ordered. It has been a great addition to my shop, helping to keep sawdust to a bare minimum, and thus helping to keep the shop clean. I'm quite please with its power, efficiency and overall performance. I would definitely recommend it to anyone having similar needs to my own. Thanks for providing such a wonderful product.

One Satisfied Customer

We have been very happy with our DCSUPER35. It was great that was available for delivery by UPS and was easy to set up. It's power and noise level is comparable to our Tempest cyclone yet it is portable. We purchased this unit so that we could dedicate it to our edgebander and locate it in an area further from our cyclone than we wanted to duct. It not only has helped keep the shop clean but it has kept the various stations of a 16' long edgebander clean and chip-free. We were so happy with it that we bought a DC2000BCF for our sliding tablesaw.

Great Collector

Thank you for the Dust Collector System. It was simple to set up and it arrived in a timely fashion. We use it our fiberglass shop daily and it is a great help! I would recommend it to any repair shop.