Improve Air Quality & Save with the PSI Professional Shop 14" Super S impeller Tempest Cyclone Dual Cannister Style

This professional shop cyclone is ideal to connect to single machines. Ideal for large home shops and small cabinet shops:
Up to 12.5 drops
Up to 50ft run
Shop size to 2500sq ft
1450 CFM
2.5HP Motor
12 Max Static Pressure
For TEMP1425S Fan Curve click on the fan curve image above
.. for more specifications click on the "Specifications Tab"

More about PSI Tempest Cyclones

The TEMP1425S advantage
PSI Tempest Cyclones are known to be the cleanest dust collection systems on the market. The cyclonic separation process captures 99.98% of all wood chips and dust particles that enter the collector. Centrifugal force drops particles of all sizes out of the air stream - everything from chips to microscopic particles. A dust bin positioned underneath the cyclone funnel captures the dust and chips in a trash container.

A Great Motor with a Great Warranty
TEMP1425S motors are designed and manufactured by an ISO 9001 certified manufacturer for continuous duty. The motors offer such exceptional reliability that we offer a 5-year warranty on the motor/blower assembly.

The Most Effective Cyclonic Filtration Available
The high filtration filter cannisters are certified to capture 99.98% of particles 1/2 micron or larger. In addition the filter media with 425 sq. ft.of filter media has over5 times the filter area of our competition, you'll be cleaning your filters only once for every 5 times you'll clean a filter from a competitor.

Superior Construction

Durable17 gauge cyclone body construction
"Neutral Vane" intake for better performance
Includes sturdy wall mounting brackets
Small footprint and low height fits under 96" ceiling

Efficient Impellers
PSI impellers are aerodynamically designed and balanced to place less stress on the motor during start-up and while running - this products high static pressure and high CFM while their heavy-duty construction provides tolerance to any chips that may happen to pass through.

2.5HP TEMPEST "S" Series Cyclone Dust Collector with 14" Aluminum Impeller Specifications

2.5HP TEMPEST "S" Series Cyclone Dust Collector with 14" Aluminum Impeller Customer Reviews

Average Customer Review: 3 Reviews

Write an online review and share your thoughts with others.

Dust Collection, Now I know what that is

Reviewer: Don Garland (Bow, WA)
Submitted: 3.16.2009

For 16 yrs I've had bag type dust collection and wasn't aware how inferior this was. This new cyclone Tempest 21/2 hp is so effective, their isn't anyway to compare the two systems. I suffer no longer.

Awesome piece of equipment!

Reviewer: Paul Bianchina (Bend, OR)
Submitted: 3.8.2009

After years of living with a too-small dust collector in my shop, I finally invested in a Tempest Cyclone as part of an overall remodeling. I had PSI do the duct layout, and ran the entire system in hard metal duct pipe to replace the cheap plastic pipe I had used before. The results were even better than I expected. The collector has an incredible amount of power, and it easily handles even big dust producers like my table saw, planer, and drum sander with ease. I also built two floor sweeps out of MDF as part of the system - something my old collector was too wimpy to handle - and they also work like a charm. It actually makes sweeping the floor fun! Be forewarned that this is a big, heavy collector. The instructions that come with it are pretty good, and assembly wasn't too difficult, although I did get the support arms installed wrong the first time and had to unbolt and reset them (that part of the instructions was a little confusing). The other part that I found a little vague was how to mount the entire unit to the wall. I ended up building a 2x4 frame that I bolted to the studs, then covered it with 3/4 plywood, so I had lots of support to bolt the unit to. You DEFINITELY will need help getting it all lifted into place. My shop is considerably cleaner now, and the system works wonderfully. Highly recommended!!!

Great Piece of Equipment

Reviewer: Greg (, )
Submitted: 5.3.2007

Just a note to let you know that I fired the system up yesterday. I have not sealed the seams etc. yet because I want to make sure everything is in the correct place. This is a truly great piece of equipment. It went together well and I can't believe how well it works. I planed my first board today and there was no dust anywhere in the shop. The noise level is really decent too. The sweep box works so good. Thanks.