Home > Woodturning > Lathe Accessories > Spindle Adapters > 3/4" x 10 tpi Headstock Spindle Adapter

3/4" x 10 tpi Headstock Spindle Adapter

Item #: LA341018
$16.95
Quantity:
In Stock Ready to Ship
Add to Wishlist
View in Catalog

Rating 5 out of 55 out of 55 out of 55 out of 55 out of 5

Description Specifications Shipping Reviews and Awards
Adapter From 3/4" x 10 tpi headstock to 1" x 8tpi male thread. Convert your spindle so that you can use chucks with different thread sizes.
Type: Chuck Adapter
Compatible Spindle Sizes: 3/4" x 10tpi
Category: Spindle Adapters
  • Package Weight: 0.88 pounds
  • Subject to Minimum $7.50 shipping charge
  • Packing: This item may pack with other items.

Note: Above shipping policies apply to Continental US only. We will call or email to advise you of shipping policies to other locations.

Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 4 Reviews

Write an online review and share your thoughts with others.

5 out of 55 out of 55 out of 55 out of 55 out of 5 3/4
Reviewer: Chester Berry (Lombard, IL)
Submitted: 9.8.2009

I found that the 3/4" x 10 tpi I found headstock spindle adapter to be made with high quality materials and the finish was smooth with no sharp edges. I needed the adaptor to put the Universal Lathe Pen Mandrel on my older lathe. I hand no problems with alignment or vibration. The adaptor simply worked, as it should.

5 out of 55 out of 55 out of 55 out of 55 out of 5 thank you psi
Reviewer: derrick scheuren (halifax, PA)
Submitted: 8.24.2009

Thank you PSI for carrying a spindle adapter for my Harbor Freight lathe. I went from not having much of a selection of accessories for my lathe to unlimited capabilities for my lathe, all thanks to a simple little adapter from PSI.

5 out of 55 out of 55 out of 55 out of 55 out of 5 adapter search
Reviewer: keith meggison (gorham, ME)
Submitted: 3.25.2009

Thank you for carrying a wide variety of adapters. I have an odd thread size on my lathe and was limited to what I could use, until I found Penn State. You opened a completely new world of wood turning projects for me by providing the varity of adapters you carry thank you

5 out of 55 out of 55 out of 55 out of 55 out of 5 Works like a charm...
Reviewer: dennis george (granville, OH)
Submitted: 3.10.2009

Turned my useless Harbor Freight Lathe into a reasonably well functioning lathe (with alot of my own customizations of course).

LEARNING CENTER

Online prices and selection generally match our online catalog, but may vary.
Prices and offers are subject to change.
© Penn State Industries
All Rights Reserved.