Great for Pen/Pencils, 10.23.2009

Reviewer: Mark S (Crystal Beach, FL)

I've tried many adhesives, but since finding this Epoxy I don't use anything else for the insertion of pen tubes into blanks. I use PSI's Pen Tube Insertion Tool and mix only enough epoxy to allow a four to five minute gluing session. I've found that the epoxy begins setting up and difficult to use in a larger amount of time. So mix small batches, and split your gluing project in session. Using coarse sand paper to roughen the surface of the tube before apply the epoxy will result in a very secure hold. The epoxy will harden in less than one hour, but when possible I leave it to cure over night. "Great epoxy at a great price."

I'v Tried Others, 9.16.2009

Reviewer: Dennis Falk (Taylor, TX)

I've tried other epoxies and they just don't measure up. These have a longer shelf life and, at least for me, seem stronger and more reliable. The price is about half of what other epoxies cost in my area, and they are delivered to my door.

glue, 9.2.2009

Reviewer: michael greenwood (pleasant view, TN)

Best epoxy.

epoxy glue, 6.30.2009

Reviewer: Lyle Glascock (Evans, GA)

This is my second order so I must like the product.

PSI Mid-Cure Epoxy, 3.29.2009

Reviewer: Steve Kucey (Columbia, MD)

Very easy to use within the time parameters. Suggest using some sort of device while applying epoxy. Caution as to the quantity mixed as setting time continues while application is in progress. Have ALL materials ready prior to any mixing and application. Also, do not overapply to prevent excessive squeeze out.

works great!, 1.21.2009

Reviewer: travis lowe (port orchard, WA)

I have used this epoxy to glue over 20 wood blanks easily. These are easy to use without getting glue on your hands! I like the longer work time because it allows me to take my time and do my best gluing job. I usually let the blanks dry over night after gluing to ensure the epoxy is cured. When using this product be sure to be in a well ventilated area and mix the two parts 50:50