Lathe chuck, 9.4.2009

Reviewer: Alfred Newman (Peabody, MA)

Fills all thats needed

Slicker then owl snot!, 9.1.2009

Reviewer: Randy Barker (Franklin, ME)

Seriously! I am very happy with this chuck, it runs in and out smoothly, grabs whatever I put to it without a hitch. I must admit that I am getting used to the secondary sets of jaws, it seems that I can latch onto whatever I want with the set that came on it that I had to force myself to try the other jaws. I am just as happy with those too. The only thing I could even come close to calling a little problem is when you are spinning the key chuck it has a tendency to screw out away from the teeth. so you have to push down on the key as you turn, but it's almost a non issue. Other then that I highly recommend this chuck to anyone! Slicker then owl snot on a hot tin roof!

Barracuda Lathe key Chuck, 7.27.2009

Reviewer: Peter Firth (Wake Forest, NC)

I received the chuck packed in its container just like they advertised. The chuck works great and is very simple to use.

Not a Bad Lathe Chuck, 6.23.2009

Reviewer: Wayne Bliss (Leslie, MI)

The Barracuda2 chuck was a replacement for a previous Penn State lever action chuck. I expected the key chuck to work much smoother than it does but it is a good value. I have already had a chance to change the chuck jaws and that is a handy feature. I have ordered the multi-tooth spur insert and can't wait to try it out as well.

Expand your Lathes capability, 6.2.2009

Reviewer: Philip Uruburu (Central Islip, NY)

Excellent chuck, I especially like the one hand operation of the chuck key, allows for support and centering of the work, Great quality at a very affordable price. Turned my first goblet this week.

Outstanding Chuck, 5.26.2009

Reviewer: terry stolzoff (chula vista, CA)

Outstanding chuck.

CSC3000C, 5.21.2009

Reviewer: Christopher Nelson (Medina, OH)

I replaced my JET chuck with-in 10 min. of getting the delivery. Went to the box of the largest jaws in the box and exchanged them. Attached a vase that I thought was finished but my teacher thought it needed to be hollow formed some more. Using one hand on pot & the other on chuck key has made a big difference. One needs more than 1/8" grip to make safe. I must have put too much side force as I was drawing the gouge out -- The pot poped off & caught my left little finger. Crack ! That wasn't the pot ! At 66 I'm still learning some hard lessons. How much torque will this chuck / key system take ?

a great product, 5.12.2009

Reviewer: judy mueller (kimball, MN)

This is a great chuck for beginners and all level turners.

Barracuda2 Chuck, 4.7.2009

Reviewer: Joseph Zeigler (Eielson AFB, AK)

When first received the chuck, I looked at it and thought there is no way this is going to meet the needs of turning large bowls, it's way to small. Boy are looks deceiving and was I wrong!! My partner and I chucked up a piece of stock for a Burch 14" bowl after cutting the tennon between centers using the #3 jaws. After about 45 min we looked at each other in amazement. This chuck is smooth operating and easy to use with the strength of a bull dozer between the jaws. He was in the market for a Supernova2, but has since changed his mind. I would recommend this chuck system to any wood turner looking to get top quality while saving a bundle. Thanks PSI for a great product.

Barracuda 2, 3.12.2009

Reviewer: david illingworth (Confluence, PA)

My first venture into wood turning and I wanted the best I could afford,looking at all that's in offer the Barracuda 2 was without a doubt the best on the market.

Barracuda2, 3.11.2009

Reviewer: Thomas Schmelter (Rocky Hill, CT)

This is my first experience with a 4 jaw chuck, but I love it so far.

Great Product + Great Price, 3.10.2009

Reviewer: Dan Weller (Walnut Creek, CA)

I have used the Barracuda2 system for a month and find all of the components of excellent quality and a joy to use. The included multiple jaws and jam screw allow for many different grips on my turning projects. I really appreciate the storage case - it keeps everything in one place and ensures that all of the components are together.

Good Chuck, 3.10.2009

Reviewer: Richard J Edwards (Fort Mill, SC)

The Barracuda 2 chuck system is a very good starter chuck. I have used it alot and I am very pleased with it.

Well worth the money, 6.3.2008

Reviewer: Russ Shamah (Lakewood, CO)

This chuck works very well. It secures the work piece and easy to use. The chuck's key adjusts easily and makes mounting stock a breeze. I have been impressed with the strength and quality of the chuck. My next purchase will be the adjustable faceplate that fits this chuck. Making a quick change over and finishing the bottom of my bowls quickly.

Best bang for the buck, 2.21.2008

Reviewer: Norbert Dupas (Dauphin, Manitoba CA, )

I bought this chuck about 2 years ago, and I have no regrets. It holds a piece very nicely, and is great when holding a tenon or used as a recess. Only thing I wish, is that I bought the Barracuda 4, as this would better fit on my new Jet 1642 EVS lathe. **NOTE: Be careful when ordering chuck adapters for this lathe. Penn state made an error, when I phone-ordered one**. All in all, still a great chuck!

Very Pleased, 12.11.2007

Reviewer: Dave Merriman (Sanford, NC US, )

This is the second chuck I purchased for my Lathe and I have been and still am very pleased with it. The square hole drive is very positive. The chuck jaws all fit and track each and every time they are changed. The wood chips and dust clear out of the chuck drive gear with ease. The storage box is stout and holds all of the parts in an organized manor. I have had this Chuck for sometime now and still have all of the parts, even the screws. I turn segmented bowls and use the #2 round jaws a great deal of the time, and have never lost a bowl due to chuck failure. Most of the turners that come to my shop go home and order this chuck. I keep the specification sheet in a plastic bag by the lathe so they can see what all comes in the box.

Barracuda2 Best for Quality and Value, 12.3.2007

Reviewer: John Armstrong (Canton, MI US, )

I was in need of a decent chuck for my lathe. The Barracuda2 appeared to be what I was looking for. I have had the chuck now for a few months and have found that it is more than I had hoped for. I have used all of the jaws provided with the system and am very pleased with the way they perform. The system is very well balanced and induce no vibration at any speed. The machining and finish on all the parts is excellent. Changing the jaw sets is quick and easy, and set up and operation works flawlessly. I have not been able to find another system of comparable quality for the price. This is the one addition to my lathe tools that I find invaluable, next to my chisels.

Best Value, 9.13.2007

Reviewer: Wood Magazine issue 179, October 2007 (Best Value Upgrade, )

Key-operated jaws give this chuck the advantage of one-hand operation...The package features four standard jaw sets for a wide range of internal and external gripping diameters, plus a screw center. Two sizes of optional flat jaws are available separately

Very impressed with the quality., 8.16.2007

Reviewer: Steve Strassburg (Bremerton, WA US, )

I'm fairly new to turning and I'm still in the process of getting all the tools I need. I've bought items from PSI before and have been happy with their products. When I got a email from them promoting the Barracuda 2 with a free large flat jaws, I decided to go for it. Since receiving it I have used it a couple of times. The chuck is well balanced, every thing is well made, fit and finish is top notch. The only complaint I have is the flat jaws aren't big enough. 7 1/2" just don't cut it sometime (but that isn't PSI's fault). I will be buying a bare chuck in the future along with a smaller flat jaws. I find it a pain to switch between jaws, I'd rather spend the time turning.

Best Bang for your Buck, 6.29.2007

Reviewer: Kenneth Falk (Camas, WA US, )

Prior to buying this chuck I did some research to see what was out there. I could not find a lot of reviews on the Barracuda 2. It was fairly new at the time and I just couldn't pass up the price. The pictures looked like it was just as well constructed as the competition. When I got mine, I couldn't have been more happier. It has performed flawlessly. The fit and finish is excellent. I love the plastic case to keep everything organized. The jaws are easy to change. I keep finding more and more uses for this chuck. I have no experience with the other chucks and as of right now I have no reason to look for a different one. This is a excellent chuck at a very reasonable price. I would definitely buy it again but I don't think I will have to because it is built very well and should last me a lifetime.

Barracuda 2-Best Jaws for the Dollar, 6.15.2007

Reviewer: ROBERT DARLING (LAKEWOOD, CA US, )

I received a Barracuda 2 Key Chuck System for Fathers Day last year and it is one of the best gifts ever. The Barracuda is easy to use, changing jaws is fast, the storage case holds everything secure and the key system is great. The key system is much easier than the lever (non-key chuck systems). The jaw sizes are perfect for the vast majority of woodturning projects-I have not found the project that the Barracuda 2 system could not handle. Great value for your money.

Excerpts reprinted from Wood Magazine, 3.20.2007

Reviewer: Jan Svec (Projects Editor, Wood Magazine, )

"Thumbing through the Penn State Industries catalog a few months ago, I stumbled onto a bargain I thought had to be too good to be true; a fully accessorized four-jaw chuck, called to check it out, and the news is good." "Getting a lot of parts for a little money doesn't mean much if the chuck doesn't perform well, but that's not the case with the Barracuda 2. I used this chuck extensively for more than six months, turning several vessels up to 11" in diameter and three small tapered display pedestals. Every time I used it, it held the workpiece securely and I felt both comfortable and confident while turning with it....." "For less than the cost of most other chucks with one set of jaws and a screw center, you get a really great little chuck, including all the accessory jaws you'll likely ever need." **For complete review, refer to Wood Magazine Issue 176, May 2007