All Customer Reviews for "7mm Basic Barrel Trimmer: Steel Cutter"
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 12 Reviews
Write an online review and share your thoughts with others.


5 out of 55 out of 55 out of 55 out of 55 out of 5 Can't work without it!, 10.27.2009
Reviewer: Loretta Boersig (Greenville, CA)

This tool is indispensable. It trims my work to a smooth, precise edge that assures me that my finished projects will have that professional look.
5 out of 55 out of 55 out of 55 out of 55 out of 5 easy finisher, 10.3.2009
Reviewer: Gordon Stutts (Lavonia, GA)

The barrel trimmer makes a smooth and flush surface for mounting on the pen mandrel
3 out of 53 out of 53 out of 53 out of 53 out of 5 barrel trimmer, 8.25.2009
Reviewer: james stone (sterling, IL)

these barrel trimmers seem to dull very easily i bought two and had same problems
4 out of 54 out of 54 out of 54 out of 54 out of 5 Basic Barrel Trimmer, 8.22.2009
Reviewer: Mick McCaslin (Murray, UT)

I'm not a big fan of unitaskers in the shop, any more than Alton Brown (Good Eats on Food Network) is fond of them in the kitchen. However, I guess making sure that the barrel is square to the brass tube I just glued into it requires something like this little beasty. It does the job well. If you're planning to turn a lot of pens, you should probably buy the carbide version.
5 out of 55 out of 55 out of 55 out of 55 out of 5 Barrell trimmer, 7.21.2009
Reviewer: Shane McCoy (Abilene, TX)

I like the top piece better than on the old ones. I used to snap the tops off of the old ones.
5 out of 55 out of 55 out of 55 out of 55 out of 5 this is a very good cutter, 7.14.2009
Reviewer: David Steinle (Fritch, TX)

very good cutter.
5 out of 55 out of 55 out of 55 out of 55 out of 5 great tool, 4.14.2009
Reviewer: George Hyatt (Cold Spring, NY)

this is a must have to square up your work
3 out of 53 out of 53 out of 53 out of 53 out of 5 dulls easy, 3.31.2009
Reviewer: Lonnie Noland (Orlando, FL)

it dulls when you cut deer antlers
5 out of 55 out of 55 out of 55 out of 55 out of 5 pen mill, 3.11.2009
Reviewer: Richard Bergstrom (Northbrook, IL)

I mounted the pen mill in the cordless drill and was able to square up my pen blanks in a flash.
5 out of 55 out of 55 out of 55 out of 55 out of 5 Trimmer, 3.10.2009
Reviewer: Glen Elgin (West Plains, MO)

This is an great must buy in tools. However, I wish that I had bought the set instead of the one piece. Well worth the money.
5 out of 55 out of 55 out of 55 out of 55 out of 5 Barrel Trimmer, 3.10.2009
Reviewer: Niel Zimmerman (Cheney, WA)

Trimmer seems to be good quality but needed sharpening.
5 out of 55 out of 55 out of 55 out of 55 out of 5 Couldn't live without this!, 1.21.2009
Reviewer: travis lowe (port orchard, WA)

This is so essential to making 7mm pens and pencils that you would be foolish not to have one! I simply pt it on my drill press and in less than 10 seconds I have perfectly squared edges ready to be turned on the lathe. Mine came in a kit and it works like a charm. Thanks PSI!
Back to 7mm Basic Barrel Trimmer: Steel Cutter

LEARNING CENTER

Online prices and selection generally match our online catalog, but may vary.
Prices and offers are subject to change.
© Penn State Industries
All Rights Reserved.